- It is recommended to work at an ambient temperature of +5°C to +30°C and a thread lock temperature of +15-20°C.
- On a clean and degrease surfaces with KR-965 Brake Cleaner prior to application. Dry.
- Shake the vial thoroughly. Remove the cap and cut off the tip.
- Distribute the required amount of compound over the entire surface of the external thread. For blind joints, apply a few drops of compound directly into the threaded hole.
- Mount the assembly and leave to harden.
- Remove excess compound with a rag.
NEW
Threadlocker removable (blue)
SKU: KR-160
One-component anaerobic compound is designed for fixing and sealing threaded connections subjected to frequent disassembly and assembly using hand tools that experience shock and vibration. Does not allow threaded connections to loosen and unscrew. Protects threads from corrosion. Is resistant to automotive technical fluids (oil, fuel, brake fluid, antifreeze, etc.).
Polymerizes without air access in gaps up to 0.13 mm. The cured fixative can be used at temperatures from -55°C to +175°C. Unscrewing torque on loose threaded connection should be no more than 24 Nm. Shear strength – 7.6 MPa (1100 psi). Designed for fasteners up to M20.
- Prevents loosening from vibration and shock loads.
- Seals and protects threaded connections from corrosion.
- If necessary, allows you to disassemble the connection with a hand tool.
- For threaded connections up to M20.
- Initial strength: 10-15 min.
- Full polymerization 24 hours.
- Shear strength: 7.6 MPa (1100 psi).
- Operating temperature range: from -55°C to +175°C.
| Content | 6 ml |
|---|---|
| Shelf life | 2 years |
Оставить вопрос
SGRPDF
Other volumes and forms
We also recommend
Александр
Добрый день. На крепеже нержавейка-нержавейка и нержавейка-оцинковка будет работать данный фиксатор резьбы?
Команда KERRY
На нержавеющей и оцинкованной стали фиксатор будет работать, но фиксация будет примерно вдвое слабее, чем на обычной стали.