- It is recommended to work at an ambient temperature of +5°C to +30°C and a thread lock temperature of +15-20°C.
- On a clean and degrease surfaces with KR-965 Brake Cleaner prior to application. Dry.
- Shake the vial thoroughly. Remove the cap and cut off the tip.
- Distribute the required amount of compound over the entire surface of the external thread. For blind joints, apply a few drops of compound directly into the threaded hole.
- Mount the assembly and leave to harden.
- Remove excess compound with a rag..
NEW
Threadlocker permanent (red)
SKU: KR-161
High-temperature one-component anaerobic compound is designed for fixing and sealing threaded connections that do not require frequent disassembly and experience vibration, shock and heat. Does not allow threaded connections to loosen and unscrew. Protects threads from corrosion. Is resistant to automotive technical fluids (oil, fuel, brake fluid, antifreeze, etc.). Prevents thread corrosion.
Polymerizes without air access in gaps up to 0.25 mm. The cured fixative can be used at temperatures from -55°C to +240°C. Unscrewing torque on loose threaded connection should be no more than 45 Nm. Shear strength – 24.8 MPa (3600 psi). Designed for fasteners up to M36.
- Prevents loosening from vibration and shock loads.
- Seals and protects threaded connections from corrosion.
- If necessary, allows you to disassemble the connection with a hand tool.
- For threaded connections up to M35.
- Initial strength: 10-15 min.
- Full polymerization 24 hours.
- Shear strength: 24.8 MPa (3600 psi).
- Operating temperature range: from -55°C to +240°C.
| Content | 6 ml |
|---|---|
| Shelf life | 2 years |
Оставить первый вопрос о “Threadlocker permanent (red)”
SGRPDF
Other volumes and forms
We also recommend
Пока нет вопросов по данному продукту :‑(