- For best results, the product should be applied at an ambient temperature of at least +10°C.
- To avoid traces of aerosol, it is recommended to protect surfaces not to be treated. Particular attention must be paid to protection of components and mechanisms of the braking system and chassis located in the immediate vicinity.
- Remove the wheel. Shake the can well for 2-3 minutes before use.
- Apply from a distance of 45–50 cm on a dry surface free from dirt, rust and grease.
- To obtain protective properties, it is sufficient to form a coating layer 1 mm thick. If necessary, it can be applied in 2–3 layers with intermediate drying for 10–15 minutes at a temperature of +20°C. Full drying time - 24 hours at a temperature of +20°C.
- Surfaces contaminated with freshly applied product should be cleaned with white-spirit.
- Remove hardened product mechanically.
Warning! At the end of application, to avoid clogging the spray head, turn the can upside down and spray until the compound stops flowing.
There are no questions about this product yet.