- It is recommended to apply the adhesive at a temperature of min. +15°C inside the car interior.
- Apply the adhesive to clean, dry, thoroughly degreased and free of old glue surfaces.
- Use different brushes to apply different adhesive components!
- • Apply one colour component (red or blue) to the bracket plate and one another to the glass, in a 1:1 ratio (exact dosage is not required).
- Press the plate firmly against the glass at the bonding point. Hold this approx. 3 minutes (ambient temperature +24ºC) until the glue hardens.
- The adhesive achieves its maximum strength after 24 hours. After that time it’s recommended to fix a mirror bracket to the plate.
Rear view mirror adhesive
SKU: KR-152
High-quality, two-component, anaerobic adhesive is intended for fixing the rear-view mirror to the windscreen as well as for bonding metals (including dissimilar metals), glass and ceramics. The resulting bond is highly resistant to vibration and impacts. Operating temperature range is from -60°C to +150°C.
| Weight | 2х0,5 g |
|---|---|
| Shelf life | 2 years |
Оставить первый вопрос о “Rear view mirror adhesive”
We also recommend
Пока нет вопросов по данному продукту :‑(