KULT 5-Minute Engine Oil System Flush

KULT 5-Minute Engine Oil System Flush

SKU: KLT-41

Flushes the lubrication system of gasoline and diesel engines in all types of vehicles and stationary equipment before an oil change. A detergent-dispersant additive package removes carbon, sludge, coke, varnish and other oil-insoluble deposits. During flushing, it cleans oil passages, the crankcase, piston rings, hydraulic lifters and other lubricated engine components. One bottle treats an oil system with a capacity of up to 6 liters.

  • Removes carbon, sludge, varnish and other deposits
  • For gasoline and diesel engines with oil systems up to 6 liters
Helpful Tips →
Content: 355 ml Category: Tags: , ,
  • Warm the engine to normal operating temperature.
  • Switch off the engine and pour the product into the oil filler neck. For oil systems below 3 liters, use half a bottle.
  • Refit the oil filler cap and idle the engine for 5–7 minutes. If the oil has not been changed for an extended period or the oil system is heavily contaminated, the cleaning time may be increased to 15–20 minutes.
  • Switch off the engine and drain the used oil, observing all applicable precautions.
  • Always replace the oil filter, then fill with fresh engine oil.

Important: The engine must remain at idle throughout the cleaning process.

Content

355 ml

Technical Specification

2384-026-53934955-11

Composition

aliphatic hydrocarbons >30%, naphthenic hydrocarbons <30%, aromatic hydrocarbons <5%, nonionic surfactants <5%

Shelf Life

5 years

There are no questions about this product yet.

You May Also Like

5-minute engine oil cleaner
KR-391270 ml

5-minute engine oil cleaner

Engine anti-smoke additive
KR-375355 ml

Engine anti-smoke additive

Engine oil soft cleaner
KR-392270 ml

Engine oil soft cleaner

Increasing engine compression additive
KR-380355 ml

Increasing engine compression additive