- Works are recommended to be carried out at an ambient temperature of +5°C to +40°C and a sealant temperature of +20…25°C.
- Clean, degrease and dry the surfaces before applying the sealant. To remove traces of old sealant, it is recommended to use the KR-969 Gasket and Sealant Remover. For degreasing and cleaning - KR-965 Brake Cleaner.
- Using the attached nozzle, apply the sealant in a continuous uniform strip 2-3 mm thick on one of the surfaces; first along the inner perimeter, then around the mounting holes and connect the parts without waiting for the polymerization to begin.
- Formation of a surface film — 10–20 min., Sealant hardening rate — 2 mm per day (at a temperature of +23°C and relative humidity of 50%).







There are no questions about this product yet.