KERRY Titanium-Filled Epoxy Stick

Category: Product Q&A Tags:

This article explains the product’s key properties, intended use and recommended application procedure.

Epoxy titan stick

It is a two-component high-viscosity metal-polymer compound reinforced with fine titanium dioxide powder. The special formula of the compound provides excellent adhesion to all types of ferrous metals. Titanium-filled epoxy stick for steel and ferrous metals KERRY® KR 120 allows you to quickly, firmly and hermetically repair a damaged product or glue the necessary elements, including those experiencing significant static and dynamic loads. Resistant to water, antifreeze, gasoline. Easy application allows you to use the compound for reliable repairs:
  • car (restoration of fasteners, stripped threads, holes for studs, bolts, minor body defects, etc.);
  • fragments of details (sealing of chips, shells, cracks, etc.);
  • steel products for household use.
The mixture hardens within 15–20 minutes. at a temperature of +20°C. Operating temperature range of the repaired product is from 60°C to +150°C. Sufficient strength is achieved after 1 hour, after which the joint can be stressed, machined and painted. The product withstands prolonged freezing without losing consumer properties.

Application

  • Clean the elements to be glued from dirt and oxides with abrasive material.
  • Degrease the surface with acetone or any other compound that removes traces of oil.
  • Separate with a sharp object a part of Epoxy titan stick sufficient to repair the damage.
  • Thoroughly knead until a homogeneous compound is obtained, then apply.
  • Firmly press the surfaces to be glued together.
  • At the end of work, wash your hands with warm water and soap.
  • During the curing of the compound (30-40 min.) it is not recommended to subject the repaired product to shaking and shock loads, this may affect the strength of the connection.
It is forbidden to use the compound for the repair of kitchenware that is in direct contact with food! IMPORTANT! If, as a result of storage for more than 24 months or wide fluctuations in temperature, the outer layer of cold welding has hardened, heat it up to + 60 ° C. You can use heating radiators, hot water, etc. for this. Let the compound cool slightly and it will restore its original properties.

View Epoxy titan stick →

Important: Read the product label and technical information before use. Test on an inconspicuous area when surface compatibility is uncertain.