- Clean the elements to be glued from dirt and oxides with abrasive material.
- Degrease the surface with acetone or any other compound that removes traces of oil.
- Separate with a sharp object a part of Epoxy titan stick sufficient to repair the damage.
- Thoroughly knead until a homogeneous compound is obtained, then apply.
- Firmly press the surfaces to be glued together.
- At the end of work, wash your hands with warm water and soap.
- During the curing of the compound (30-40 min.) it is not recommended to subject the repaired product to shaking and shock loads, this may affect the strength of the connection.
It is forbidden to use the compound for the repair of kitchenware that is in direct contact with food!
IMPORTANT! If, as a result of storage for more than 24 months or wide fluctuations in temperature, the outer layer of cold welding has hardened, heat it up to + 60 ° C. You can use heating radiators, hot water, etc. for this. Let the compound cool slightly and it will restore its original properties.
Пока нет вопросов по данному продукту :‑(