PAINT REMOVER

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• Avoid contact with plastic and rubber elements. In case of uncontrolled continuous contact, components of the product may cause damage and destruction of some elastomers and plastics.
• For best results, apply the product at a minimum ambient temperature of +10°C.
• Shake well for 1-2 minutes before use.
• Spray the Remover from a distance of 25-30 cm to a clean and dry surface. In hot weather cover the treated parts with plastic film to slow down the evaporation of the product and to prolong its effect.
• The most resistant coatings (thermal-drying polyester paints, epoxy paints) require multiple applications of the remover with time intervals of 5-15 min, depending on the coating thickness and the ambient temperature.
• The effect of the remover is seen by bubbling, peeling or softening of the paint coating. Then the coating can then be easily removed with a scraper or cloth. Before painting again, the surfaces should be degreased. We recommend KERRY^® Silicone Remover KR-968 for degreasing.

Warning! After use, to avoid clogging the spray head, turn the can upside down and spray until the compound stops coming out.