New

KERRY® GARAGE CREW ML Cavity Wax

SKU: KC-949

Anticorrosive preservative compound KERRY® KR-948 is designed for anti-corrosion protection of hidden cavities of the car body (sills, door frames, pillars, spars, interior floor, trunk, etc.). Provides temporary anti-corrosion protection of the outer surfaces of the car (bottom, sills, wheel arches, etc.). Resistant to water and aqueous salt solutions used for road treatment. The preservative can be applied to a rusty and damp surface, as well as to old anti-corrosion coatings.

  • Protect untreated surfaces to avoid traces of aerosol.
  • For best results, the product should be applied at an ambient temperature of at least +10°C.
  • Shake the can well for 2–3 minutes before use.
  • Apply preservative in 2-3 layers.
  • It is recommended to use KERRY® Tar and Grease Remover for removal from paint coatings.
  • Allow the compound to dry for 24 hours before operating the vehicle.
Extension Tube

Included

Content

650 ml

Composition

aliphatic hydrocarbons >30%, aromatic hydrocarbons >30%, corrosion inhibitors <15%, synthetic waxes <5%, mineral oil <5%, synthetic resins <5%

Technical Specification

2384-026-53934955-11

Storage

Store in a covered, dry and ventilated warehouse at +5 to +25 °C, at least 1 m from heating appliances.

Shelf Life

5 years

There are no questions about this product yet.