- If possible, remove any dirt and loose rust.
- Shake well before use.
- Spray the compound onto the parts to be treated using the supplied extension tube. Apply in intervals of 10-15 seconds to let the compound evaporate.
- Overall processing time is 3-6 minutes.
- The rate of exposure and the amount of product required for freezing depend on the size of the parts, the surface area and the thermal conductivity of the material.
Freeze shock penetrating lubricant
SKU: KR-940-3
Highly effective product for unscrewing corroded threaded joints. Removes corrosion deposits through shrinkage deformation when the temperature of the parts to be treated suddenly drops (down to -30°C). Through the pores and cracks that are formed, rust is immediately penetrated by the mineral oil that is in the composition. Rapidly penetrates into hard-to-reach surfaces and gaps, the labricant facilitates disassembly of all car fasteners. Prevents further corrosion.
| Content | 335 ml |
|---|---|
| Shelf life | 5 years |
Оставить вопрос
We also recommend
Афанасий
Для отвинчивания колесных болтов подойдет?
Команда KERRY
Подойдет.
Павел
Для выкручивания “прикипевшей” свечи подходит?
Команда KERRY
Должен подойти. Лучше не заливать много, чтобы масло не попало в цилиндр.