Stone-chip coatings protect sills, lower body panels and other vulnerable areas from gravel impact, moisture and road salt. A smooth coating produces a uniform finish, while a textured coating recreates an orange-peel appearance and can help conceal minor surface irregularities.
Antigravel
Provides durable anti-corrosion protection for underside, fenders, bumpers, wheel arches and sills of the vehicle. It protects the surface against stone chips that cause an intensive abrasion impact, road chemicals and other aggressive factors. It forms a durable elastic coating which is resistant to temperature changes. It does not crack or peel when it is cold. It has good adhesion and acoustic insulation. Fast-drying. After drying the coating can be painted with most paints.Application
- In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
- For best results, apply the product at a minimum ambient temperature of +10°C.
- Shake well for 1-2 minutes before use.
- Spray the product to a dry, cleaned from dirt, rust and grease surface, from a distance of 25-30 cm, in 2-3 coats, with intercoat drying 10-15 minutes. Dry to handle at +20°C – 2 hours, then the coating can be painted.
Antigravel (orange peel texture)
Professional product for restoration of texture coatings (orange peel effect) of new and repaired car parts (wheel arches, sills, fenders, etc.) and for providing durable protection against stone chips and abrasive sand. Prevents underside damage to the car body and other vehicle parts. It has good adhesion and acoustic insulation. It forms a durable elastic coating which is resistant to temperature changes. It does not crack or peel when it is cold. Fast-drying. After drying the coating can be painted with most paints.Application
- In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
- For best results, apply the product at a minimum ambient temperature of +10°C.
- Shake well for 1-2 minutes before use.
- Spray the product to a dry, cleaned from dirt, rust and grease surface, from a distance of 25-30 cm, in 2-3 coats, with intercoat drying 10-15 minutes. Dry to handle at +20°C – 2 hours, then the coating can be painted.
View Antigravel (orange peel texture) →
Important: Read the product label and technical information before use. Test on an inconspicuous area when surface compatibility is uncertain.