This article explains the product’s key properties, intended use and recommended application procedure.
Wheel spray paint
Wheel Spray Paint is intended for painting wheel rims of cars, buses and other vehicles; for decorative painting of any metal and pre-primed wooden surfaces. This product contains special components which increase the stability of the paint coating against the abrasive effects of sand, flying stones, the corrosive effects of water and road chemicals. It has excellent adhesion, good coverage and weather resistance.Application
- In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
- For best results, apply the product at a minimum ambient temperature of +10°C.
- Shake well for 2-3 minutes before use.
- Spray the paint from a distance of 25-30 cm, in 2-3 paint coats, avoiding overspray, with intercoat drying 10-15 minutes.
- Dry to touch at +20°C is not less than 40 minutes, dry to handle at +20°C – not less than 5 hours, at +80°C for 60 minutes.
Important: Read the product label and technical information before use. Test on an inconspicuous area when surface compatibility is uncertain.