This article explains the product’s key properties, intended use and recommended application procedure.
PTFE chain lubricant
Intended for the lubrication of chain drives of motorbikes and bicycles. PTFE provides maximum wear protection and extends chain service life. Removes moisture, repels water and dirt, prevents corrosion. Easily penetrates under the chain rollers to the lubrication spots. After application the lubricant forms a strong film, which has the required consistency and high adhesion. It does not drip out or wash off with water. It works in the friction zone without getting onto the chain surface, which prevents abrasive particles from sticking to it. The blue colour of the lubricant is an indication of its application. The lubricant colour, the 360° valve and the spray head with nozzle allow for precise dosing and application.Application
- Clean the chain with «KERRY Brake Cleaner» and dry it.
- Shake well. Apply a thin layer of lubricant on top of the lower section of the chain along its entire length while turning the chain drive.
- Remove excess lubricant with a lint-free cloth.
Important: Read the product label and technical information before use. Test on an inconspicuous area when surface compatibility is uncertain.