This article explains the product’s key properties, intended use and recommended application procedure.
Power engine cleaner (solvent-free)
Effective, water-based foam easily removes dirt, road dust and oil stains on the outside of the engine. Safe in contact with plastics, rubber, painted surfaces and metal. Non-toxic, non-flammable, easy to wash off with water. Recommended to be used several times per year, especially before the beginning of the season, after engine repairs, for pre-sale preparation of the car. Can also be used to clean motorbike engines, boat engines, agricultural machinery and industrial equipment.Application
- Warm the engine up to 50-60 °C. Remove the accumulator clamps.
- Cover the carburetor and electronic components which are sensitive to water (battery, electrical distributor, autonomous alarm system, etc.) with the film.
- Remove dirt and deposits mechanically.
- Shake well and spray the product evenly onto the surfaces to be cleaned.
- Let the compound work for 10-15 minutes.
- Wash off the dirt with a strong jet of water.
- Repeat the cleaning process if necessary.
- Remove the film and run the engine until the engine compartment is thoroughly dry.
View Power engine cleaner (solvent-free) →
Foaming engine cleaner
For cleaning different dirt and oil stains on the outside of the engine that form during the operation of the car. Recommended to be used several times per year, especially before the beginning of the season, after engine repairs, for pre-sale preparation of the car. Can also be used to clean motorbike engines, boat engines, agricultural machinery and industrial equipment.Application
- Warm the engine up to 50-60 °C. Remove the accumulator clamps.
- Cover the carburetor and electronic components which are sensitive to water (battery, electrical distributor, autonomous alarm system, etc.) with the film.
- Remove dirt and deposits mechanically.
- Shake well and spray the product evenly onto the surfaces to be cleaned.
- Let the compound work for 10-15 minutes.
- Wash off the dirt with a strong jet of water.
- Repeat the cleaning process if necessary.
- Remove the film and run the engine until the engine compartment is thoroughly dry.
Important: Read the product label and technical information before use. Test on an inconspicuous area when surface compatibility is uncertain.