- Work is recommended to be carried out at an ambient temperature of 5°C to 40°C and a sealant temperature of 20–25°C. If the tube is kept well below 15°C, the applicator plastic becomes brittle, which, combined with the increased viscosity of the cold sealant, can cause the applicator to break.
- Apply the sealant to a clean, dry and grease-free surface. To remove traces of old sealant, we recommend using KR-969 “Sealant Remover” and KR-965 “Brake Cleaner” for cleaning.
- Remove the first opening control flag, remove the protective cap. Activate the applicator by smoothly turning its head clockwise in the “MAX” direction until it stops, the applicator trigger will rise to a working position.
Warning! In case of an incomplete rotation to the “MAX” position, the applicator head may be irretrievably dismantled! - Roller thickness is adjustable with a trigger pull, application speed and angle between nozzle and application surface.
- Gently pulling the trigger, apply the sealant in a continuous uniform strip on one of the surfaces, first along the perimeter, then around the mounting holes. Bond the surfaces immediately before the silicone hardens. Once the sealant has hardened, no further tightening of the bolts is required.
- At the end of work, to prevent unwanted dosing, gently turn the applicator head counterclockwise in the direction of “MIN” until it stops, clean the spout and put on the protective cap.
- Surfaces contaminated with sealant should be cleaned with a solvent (acetone, white-spirit) until the sealant has hardened. Remove excess hardened sealant mechanically using KR-969 Sealant Remover.
- Formation of a surface film — 10–12 min., Sealant hardening rate — 2 mm per day (at a temperature of +23°C and relative humidity of 50%).
NEW
Hi-temp neutral gasket maker (RTV). Pressurized tube
SKU: KR-143-2
POWER CAN is an automated bottled sealant system for maximum precision and ease of application.
Hi-temp neutral gasket maker is used to repair or form gaskets in high temperature exposed components such as engine sump, crankcase cover/transmission sump, thermostat housing, water pump. Can be applied to stock gaskets to improve their performance (not recommended for use on the cylinder head).
The compound is solvent and acid free, non-corrosive, safe for oxygen sensors. Automotive gasket can be used to seal electrical connections and sensors. Characterized by excellent adhesion to surfaces made of metal, plastic, glass, rubber.
Silicone anti-sealant is suitable for securing and repairing car headlights, eliminates leaks through car glass seals. Vulcanizes at room temperature (RTV) to form a strong, flexible gasket. Does not crack and does not shrink.
- Does not break down under the action of water, oils, antifreeze and other automotive technical fluids (with the exception of gasoline and diesel fuel).
- High elasticity: resistant to compression, tension, shear and vibration loads.
- Wide operating temperature range from -60°C to +345°C.
- For 13–14 linear meters with a roller diameter of 3 mm.
| Content | 100 ml |
|---|---|
| Color | Black |
| Shelf life | 2 years |
Оставить первый вопрос о “Hi-temp neutral gasket maker (RTV). Pressurized tube”
SGRPDF
Пока нет вопросов по данному продукту :‑(